E-98

Corrosion-resistant, powder coated epoxy finish Durable, cast iron construction Cast iron switch case, motor and pump housing Engineered thermoplastic base No sheet metal parts to rust or corrode All castings are cast iron class 25-30 25000# tensile strength Stainless steel screws, guard, handle, arm and seal assembly Float-operated 2-pole mechanical switch Permanent split capacitor motor, oil-filled and hermetically-sealed, automatic reset thermal overload protection Bearings – upper and lower oil-fed cast iron Carbon and ceramic shaft seal Entire unit pressure-tested after assembly Watertight, neoprene square ring between motor and pump housing Maximum temperature for effluent or dewatering: 130 °F (54 °C) Passes 1/2” (13 mm) spherical solids No screens to clog 1-1/2” NPT discharge (1-1/2” x 2” PVC adapter included with BN and BE Models) On point: 9-1/2” (24 cm) Off point: 3” (8 cm) Major width: 10-1/8″ (25.7 cm) Major height: 12″ (30 cm) Simplex and duplex systems available Packaged systems available Automatic and non-automatic available Available with piggyback variable level float switch 3 year limited warranty Consult Factory for Special Applications Electrical alternators for duplex systems are available and supplied with an alarm Mechanical alternators for duplex systems are available with or without alarm switches Variable level float switches are available for controlling single and three phase systems Double piggyback, variable level float switches are available for variable level long cycle controls Refer to FM1922 and FM0806 for temperatures above 130 °F (54 °C)